Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

 

When configured, the application is able to transition the issue in a new status automatically.

Depending by the applied configuration the issue can transition when none, all, some approvers have approved or rejected.

The automatic transition can trigger the configured post functions and check condition and validators (Responsive automatic transition) or do not trigger the configured post functions and do not check condition and validators (Forced automatic transition).

 

 

 

Overview

The settings impacting the automatic transition include the following:

  • Automatic workflow transition global settings

    This setting allows to choose enabling the Responsive automatic transition or the Forced automatic transition.


  • Automatic workflow transition on approving

    This setting allows to choose enabling/disabling the automatic transition depending by the received approbations.


  • Automatic workflow transition on rejecting

    This setting allows to choose enabling/disabling the automatic transition depending by the received rejections.


  • Transition on rejecting

    This setting allows to choose the transition to perform on rejecting.


  • Enable automatic workflow transition based upon conditional and unconditional minimum required approbations/rejections

    This setting allows to enable automatic workflow transition based upon conditional and unconditional minimum required approbations/rejections.

     When this option isn't enabled the automatic transition occurs only on complete approbation or rejection.


  • Minimum Required approbations/rejections

    This setting allows automatic transition depending by the number of approbations and rejections

Automatic workflow transition global settings

  1. Navigate the Approval Mappings administration screen or the Approvals configurations for Single issue

Automatic workflow transition on approving/rejecting

  1. Navigate the Approval Mappings administration screen or the Approvals configurations for Single issue

Transition on rejecting


Enable automatic workflow transition based upon conditional and unconditional minimum required approbations/rejections

 

Minimum Required approbations/rejections

  1. Navigate the Approval Mappings administration screen or the Approvals configurations for Single issue


Failure of Responsive automatic transition

When transitioning an issue via the Responsive Automatic Transition, if validators or conditions are not satisfied, the following alert shows up:

When this problem occurs the system administrator can transition the issue without checking the conditions and validators by clicking Force issue Transition.

Notice that the Forced issue Transition doesn't trigger the configured workflow's post functions.

 

  • No labels